Netopia R2020 사용자 설명서

To begin Easy Setup, select Easy Setup in the Main Menu, then press Return.

The Easy Setup Profile screen appears.

The Easy Setup Profile screen is where you configure the parameters that control the Netopia R2020’s 
connection to a specific remote destination, usually an ISP or a corporate site.

On a Netopia R2020 Dual Analog Router you can add up to 15 more connection profiles, for a total of 16. See 

1.

Select Number to Dial and enter the telephone number you received from your ISP. This is the number the 
Netopia R2020 dials to reach your ISP. Enter the number as you would dial it, including any required 
prefixes (such as area, access, and long-distance dialing codes).  You may also use punctuation.

Note: When placing a multi-channel call, the answering equipment must either:

■

be in a “hunt group,” where a single telephone number ser vices multiple lines, or

■

the answering side must implement MP or BAP as a method to advise the calling side what number(s) 
to use.

ISPs or corporate IS groups will meet these conditions. For other non-standard dialup connections, you 
should verify that one or the other of these conditions is true.

2.

To enable address translation, toggle Address Translation Enabled to Yes. For more information on 
Network Address Translation, see 

3.

Select IP Addressing and press Return. From the pop-up menu choose Numbered or Unnumbered  (the 
default).

                   Connection Profile 1: Easy Setup Profile

         Number to Dial:                    212 555 1212

         Address Translation Enabled:       Yes
         IP Addressing...                   Numbered

         Local WAN IP Address:              0.0.0.0
         Local WAN IP Mask:                 0.0.0.0
         Remote IP Address:                 127.0.0.2
         Remote IP Mask:                    255.255.255.255

         PPP Authentication...              PAP
         Send User Name:
         Send Password:

         PREVIOUS SCREEN                    NEXT SCREEN

Enter the directory number for the remote network connection.
Enter basic information about your WAN connection with this screen.