Netgear DG834GT 사용자 설명서

다운로드
페이지 176
Reference Manual for the Model DG834GT 108 Mbps Super Wireless ADSL Router
B-8
Network and Routing Basics
August 2004
 
Figure 8-3: Single IP Address Operation Using NAT
This scheme offers the additional benefit of firewall-like protection because the internal LAN 
addresses are not available to the Internet through the translated connection. All incoming 
inquiries are filtered out by the router. This filtering can prevent intruders from probing your 
system. However, using port forwarding, you can allow one PC (for example, a Web server) on 
your local network to be accessible to outside users.
MAC Addresses and Address Resolution Protocol
An IP address alone cannot be used to deliver data from one LAN device to another. To send data 
between LAN devices, you must convert the IP address of the destination device to its media 
access control (MAC) address. Each device on an Ethernet network has a unique MAC address, 
which is a 48-bit number assigned to each device by the manufacturer. The technique that 
associates the IP address with a MAC address is known as address resolution. Internet Protocol 
uses the Address Resolution Protocol (ARP) to resolve MAC addresses.
If a device sends data to another station on the network and the destination MAC address is not yet 
recorded, ARP is used. An ARP request is broadcast onto the network. All stations on the network 
receive and read the request. The destination IP address for the chosen station is included as part of 
the message so that only the station with this IP address responds to the ARP request. All other 
stations discard the request. 
7786EA
192.168.0.2
192.168.0.3
192.168.0.4
192.168.0.5
192.168.0.1
172.21.15.105
Private IP addresses
assigned by user
Internet
IP addresses
assigned by ISP