Netgear DG834GT 사용자 설명서

3-2

Connecting the Router to the Internet

Each device such as a telephone, fax machine, answering machine, or caller ID display will require 
an ADSL microfilter.

Do not connect the DG834GT to the ADSL line through a microfilter unless the microfilter 

is a combination microfilter/splitter specifically designed for this purpose. Doing so will prevent 
the built-in ADSL modem in the DG834GT from establishing a connection to the Internet. If you 
have any doubts about this, connect the DG834GT directly to the ADSL line.

Use an ADSL microfilter with built-in splitter when there is a single wall outlet which must 
provide connectivity for both the DG834GT and telephone equipment.

The DG834GT Super Wireless ADSL Router connects to your Ethernet LAN via twisted-pair 
cables. If the computer will connect to your network at 100 Mbps, you must use a Category 5 
(CAT5) cable such as the one provided with your router.

To use the DG834GT Super Wireless ADSL Router on your network, each computer must have an 
installed Ethernet adapter and an Ethernet cable, or a 802.11g wireless adapter. 

For the initial connection to the Internet and configuration of your router, you need to connect a 
computer to the router which is set to automatically get its TCP/IP configuration from the router 
via DHCP.

Please refer to 

 for assistance with DHCP 

configuration.