Lucent Technologies merlin messaging system 사용자 설명서
Enabling Rotary Signaling
In order for the MERLIN Messaging System to be able to transfer calls, turn the Message-Waiting Lights On and Off,
and perform Outcalling, all MERLIN Messaging System voice ports must be programmed as rotary enabled.
and perform Outcalling, all MERLIN Messaging System voice ports must be programmed as rotary enabled.
To enable rotary signaling:
Step
Programming task
Console Input/Selection
PC Input/Selection
1
Enter Programming mode
Sys Program
Exit/Start
[any key]
2
Select Extensions
Extensions
3
Display third page of menu
/
/
4
Select Rotary Enable
RotaryEnabl
5
Enter the extension number of the
MERLIN Messaging System voice port
MERLIN Messaging System voice port
[nnn]
Enter
[nnn]
6
Repeat Step 5 for all voice ports
7
Make sure all MERLIN Messaging
System voice ports are rotary enabled.
System voice ports are rotary enabled.
8
Return to the System Programming
menu
menu
Exit/Back
Exit/Back
Procedures
Creating a Calling Group and Assigning group Members
Assigning Lines to the Voice Port Used for Outcalling in Key Mode
Setting the Outcalling Lines to No Ring
Assigning Lines to the Voice Port Used for Outcalling in Key Mode
Setting the Outcalling Lines to No Ring
Enabling Rotary Signaling
http://www.sostc.com/lucent/installation/programming_communication/mmipcpmp5.htm [2/2/2000 2:32:25 PM]