Lucent Technologies merlin messaging system 사용자 설명서
Assigning Personal Lines
With Immediate Call Handling, if you want a DLC or other telephone that is not a QCC to provide backup
call handling for the Automated Attendant, you must assign the lines answered by the Automated Attendant
as Personal Line buttons. You must also set the Personal Line buttons to Delay Ring to ensure proper
operation.
call handling for the Automated Attendant, you must assign the lines answered by the Automated Attendant
as Personal Line buttons. You must also set the Personal Line buttons to Delay Ring to ensure proper
operation.
To add an outside line to the extension used for Outcalling in Key mode:
Step Programming Task
Console Input/Selection
PC Input/Selection
1
Enter Programming mode
Sys Program
Exit/Back
[any key]
2
Select Extensions
Extensions
3
Select Lines/Trunks
Lines/Trunks
4
Enter the extension number you want
to program
to program
[nnn]
Enter
[nnn]
5
Add the Outcalling line assignments
by selecting each line button and
turning on the green
Message-Waiting light
by selecting each line button and
turning on the green
Message-Waiting light
Press line button on console
or
+
function key
6
Press Exit/Back when you have
finished adding the Outcalling lines
to that extension
finished adding the Outcalling lines
to that extension
Exit/Back
7
Repeat Steps 4-6 for each extension
providing backup call handling for
the Automated Attendant
providing backup call handling for
the Automated Attendant
8
Return to System Programming menu
Exit/Back
Exit/Back
Assigning Personal Lines
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpmp3.htm [2/2/2000 2:33:32 PM]