Lucent Technologies merlin messaging system 사용자 설명서
Centralized Voice Messaging in a Private Network
The MERLIN Messaging System can also be used in a Centralized Voice Messaging
configuration in a private network. MERLIN LEGEND Communications Systems (Release 7.0
(and later) and/or MERLIN MAGIX Integrated Systems connected in a private network by
tandem trunks may share a centralized MERLIN Messaging System connected to one of the
MERLIN LEGEND systems, which is then known as the "VMS hub" system. "Remote"
MERLIN LEGEND systems which are directly connected to the "VMS hub" system by
tandem trunks can then share the centralized MERLIN Messaging System.
configuration in a private network. MERLIN LEGEND Communications Systems (Release 7.0
(and later) and/or MERLIN MAGIX Integrated Systems connected in a private network by
tandem trunks may share a centralized MERLIN Messaging System connected to one of the
MERLIN LEGEND systems, which is then known as the "VMS hub" system. "Remote"
MERLIN LEGEND systems which are directly connected to the "VMS hub" system by
tandem trunks can then share the centralized MERLIN Messaging System.
Coverage and overflow calls using Calling Groups from the VMS hub and any of the remote
systems can be sent to the centralized MERLIN Messaging System. System users retrieving
voice mail can call the same number from any location and be directly connected to the
centralized MERLIN Messaging System. The centralized MERLIN Messaging System updates
Message–Waiting lights across the private network for its subscribers on remote systems.
systems can be sent to the centralized MERLIN Messaging System. System users retrieving
voice mail can call the same number from any location and be directly connected to the
centralized MERLIN Messaging System. The centralized MERLIN Messaging System updates
Message–Waiting lights across the private network for its subscribers on remote systems.
The following are general guidelines for configuring a centralized MERLIN Messaging
System. For complete details and programming instructions for networked systems, refer to the
Network Reference for the communications system.
System. For complete details and programming instructions for networked systems, refer to the
Network Reference for the communications system.
On the communications systems in the private network, configure the following:
The extensions and lines on all networked communications systems should be
numbered unambiguously. For example, on communications system 1, extensions
could be numbered between 1000–1999, on communications system 2, between
2000–2999 and on communications system 3 between 3000–3999, etc. The lines
on communications system 1 could be 1801–1880, on communications system 2
2801–2880; and on communications system 3, 3801–3880.
numbered unambiguously. For example, on communications system 1, extensions
could be numbered between 1000–1999, on communications system 2, between
2000–2999 and on communications system 3 between 3000–3999, etc. The lines
on communications system 1 could be 1801–1880, on communications system 2
2801–2880; and on communications system 3, 3801–3880.
❍
On the VMS Hub system (where the MERLIN Messaging System module is
physically located), program the communications system for the MERLIN
Messaging System as if it were a stand-alone communications system.
physically located), program the communications system for the MERLIN
Messaging System as if it were a stand-alone communications system.
❍
On each remote communications system that will share the MERLIN Messaging
System, program the communications system for the MERLIN Messaging System
as if it were a stand-alone communications system with the following exception:
System, program the communications system for the MERLIN Messaging System
as if it were a stand-alone communications system with the following exception:
For the MERLIN Messaging System Calling Group, program only one
member — a non–local Uniform Dial Plan (UDP) number that directs calls
to the MERLIN Messaging System Calling Group on the VMS Hub
system.
member — a non–local Uniform Dial Plan (UDP) number that directs calls
to the MERLIN Messaging System Calling Group on the VMS Hub
system.
■
❍
For Message–Waiting lights to work across private networks, the communications
systems must be connected via PRI, T1–TIE or E&M TIE lines. Also, the Switch
Number must be programmed (refer to the Network Reference for complete
details).
systems must be connected via PRI, T1–TIE or E&M TIE lines. Also, the Switch
Number must be programmed (refer to the Network Reference for complete
details).
❍
●
On the MERLIN Messaging System, configure the following:
Create a mailbox for each local and non–local extension that is to receive Voice
Mail coverage.
Mail coverage.
❍
Create a transfer–only mailbox for each local and non–local extension as required.
❍
●
Centralized Voice Messaging in a Private Network
http://www.sostc.com/lucent/systemplanning/callhandling/mmcspchcvm.htm (1 of 2) [2/2/2000 2:31:17 PM]