Netgear JNR1010v2 사용자 설명서
Hardware Setup
9
N150 and N300 Wireless Routers
Cable Your Router
The installation guide that came in the box has more details about installation.The following
illustration shows typical cable connections for a router.
illustration shows typical cable connections for a router.
Your router might look different than
the router shown in this diagram.
the router shown in this diagram.
Modem
Router
Internet
Ethernet cable
Ethernet cable
(included with some models)
(included with some models)
Figure 1. Router cable connections
To cable your router:
1.
Prepare your modem.
Unplug your modem’s power. If it has a battery backup, remove the battery.
2.
Connect the modem.
Plug in your modem. Put the battery back in. Then cable the modem to the router’s
Internet port
Internet port
3.
Connect the power adapter cord that came in the package to the power input on the rear
panel of the router and plug it in to an electrical outlet.
panel of the router and plug it in to an electrical outlet.
The Power LED
lights.
4.
Connect a computer or wireless device.
You have two options:
•
Connect with WiFi. To connect with WiFi, use the WiFi network name and password
on the product label.
on the product label.
•
Connect with an Ethernet cable. Use an Ethernet cable to connect a computer to
one of the Ethernet LAN ports on the rear panel of the router.
one of the Ethernet LAN ports on the rear panel of the router.