CNet Technology CNIG904S 사용자 설명서

CNet Technology Inc                                                                                                                       Configuration

15

If you selected PPPoE on the WAN screen, the display will be like the following example.

The name of the Internet account provided by your ISP.

Enter the password for the above account. Re-enter the password in
the Verify field, to ensure it is correct.

Normally, this is Dynamic; use this setting if your ISP did not
provide an IP Address. If your ISP did provide an IP Address,
select Fixed and enter the value they provided.

If an connection is inactive for longer than this time period, it will
be terminated. If zero (0), then the connection will never be termi-
nated.

Normally, this should be Enabled. If disabled, you must use the
Connect button on the Status screen to establish a connection.

Save any data you have entered on this screen. Remember to save
before changing to another screen.

Cancel any data you have entered since the last "Save" operation.