Netgear EX6120 사용자 설명서

A message displays confirming that the extender is connected to the new extended WiFi 

network.

Click the NEXT button.

The registration page displays.

Complete the registration fields and click the FINISH button to complete the setup.

If you do not want to register your extender, click the Skip Registration link. Note that 
you must register your extender before you can use NETGEAR telephone support.

The Status page displays.

Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.

The location that you choose must be within the range of your existing WiFi router 
network.

Plug the extender into an electrical outlet.

Wait for the Power LED to light amber and then turn green. 

If the Power LED does not light, press the Power On/Off button.

Use the Router Link LED to help you choose a spot where the extender-to-router connection 
is optimal.

The extender connects to your existing router’s WiFi network.

If the WiFi signal is weak, the first time you join the extender network, the Router Link LED or 
Device Link LED is amber or red. If this happens, adjust the position of the extender:

If the Router Link LED is amber or red, move the extender closer to the router.

If the Device Link LED is amber or red, move the computer or WiFi device closer to the 
extender.