Huawei MC509 사용자 설명서
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
AT Command Interface Specification
Basic Configuration Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35
2.13.3 Parameter Description
<delay_time>: Delay time.
0
Disable the function of this command.
1~65535
Delay time, indicates in second.
AT^RESET without a parameter is equivalent to AT^RESET=0.
2.14 ^MSO–Shutdown Command
2.14.1 Syntax
Command
Possible Response(s)
^MSO
<CR><LF>OK<CR><LF>
2.14.2 Interface Description
This command powers off the MT. When the command is executed, the MT logs out
of the network, saves subscriber data, and then shut down.
of the network, saves subscriber data, and then shut down.
2.15 ^HS–Command for Shaking Hands with the TE
2.15.1 Syntax
Command
Possible Response(s)
^HS=<id>,<action>
<CR><LF>^HS:<id>,<protocol>,<is_offline>,<produ
ct_class>,<product_id>[,<software_id>]
ct_class>,<product_id>[,<software_id>]
<CR><LF><CR><LF>OK<CR><LF>
2.15.2 Interface Description
This command initiates a handshake between the TE and the MT.
2.15.3 Parameter Description
<id>: Consists of eight hex digits. It indicates the ID reported by the MT for identifying
the MT. When the TE sends this command for the first time, id is set to 0, and then id
is set to the value reported by the MT.
the MT. When the TE sends this command for the first time, id is set to 0, and then id
is set to the value reported by the MT.