Netgear DGND4000-100NAS 사용자 설명서

Select ADVANCED > Advanced Setup > Wireless Repeating Function to display the 
Wireless Repeating Function screen.

Depending on the frequency you want to use, select the Enable Wireless Repeating 
Function check box and select the Wireless Base Station radio button.

Enter the MAC address for one or more repeater units.

Click Apply to save your changes.

Set Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless 
connection to the base station.

If you are using the DGND4000 base station with a non-NETGEAR 
wireless modem router as the repeater, you might need to change 
additional configuration settings. In particular, you should disable the 
DHCP server function on the wireless repeater AP.



Log in to the wireless modem router that is the repeater. Select BASIC > Wireless 
Settings and verify that the wireless settings match the base unit exactly. The wireless 
security option has to be set to WEP or None.

Select ADVANCED > Advanced Setup > Wireless Repeating Function, and select the 
Enable Wireless Repeating Function check box and the Wireless Repeater radio button.

Fill in the Repeater IP Address field. This IP address has to be in the same subnet as the 
base station, but different from the LAN IP of the base station.