Netgear DGND4000-100NAS 사용자 설명서
Advanced Settings
121
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
account and host name that you configure in the wireless modem router. Then, whenever
your ISP-assigned IP address changes, your wireless modem router automatically contacts
the Dynamic DNS service provider, logs in to your account, and registers your new IP
address. If your host name is hostname, for example, you can reach your wireless modem
router at http://hostname.dyndns.org.
your ISP-assigned IP address changes, your wireless modem router automatically contacts
the Dynamic DNS service provider, logs in to your account, and registers your new IP
address. If your host name is hostname, for example, you can reach your wireless modem
router at http://hostname.dyndns.org.
On the Advanced tab, select Advanced Setup > Dynamic DNS to display the following
screen:
screen:
Figure 12. Forward traffic to a changing IP address
To set up Dynamic DNS:
1.
Register for an account with one of the Dynamic DNS service providers whose
addresses appear in the Service Provider list.
addresses appear in the Service Provider list.
2.
Select the Use a Dynamic DNS Service check box.
3.
Select the address of your Dynamic DNS service provider. For example, for DynDNS.org,
select www.dyndns.org.
select www.dyndns.org.
4.
Type the host name (or domain name) that your Dynamic DNS service provider gave you.
5.
Type the user name for your Dynamic DNS account. This is the name that you use to log in
to your account, not your host name.
to your account, not your host name.
6.
Type the password (or key) for your Dynamic DNS account.
7.
Click Apply to save your configuration.
Static Routes
Static routes provide additional routing information to your wireless modem router. Under
usual circumstances, the wireless modem router has adequate routing information after it has
been configured for Internet access, and you do not need to configure additional static
usual circumstances, the wireless modem router has adequate routing information after it has
been configured for Internet access, and you do not need to configure additional static