Netgear DGND4000-100NAS 사용자 설명서

Solid green

A LAN port has detected an Ethernet link with a device.

Blinking green

Data is being transmitted or received.

Off

No link is detected on these ports.

Solid green

Power is supplied to the router.

Solid red

POST (power-on self-test) failure or a device malfunction has occurred.

Off

Power is not supplied to the router.

Restore Factory 
Settings

LED blinks momentarily when the Restore Factory Settings button on the 
bottom of the unit is pressed for 6 seconds. The Power LED then blinks red 
three times when the Restore Factory Settings button is released and then 
turns green as the gateway resets to the factory defaults.

Position Your Wireless Router

The wireless modem router lets you access your network from anywhere within the operating 
range of your wireless network. However, the operating distance or range of your wireless 
connection can vary significantly depending on the physical placement of your router. For 
example, the thickness and number of walls the wireless signal passes through can limit the 
range. For best results, place your router: 

Near the center of the area where your computers and other devices operate, and 
preferably within line of sight to your wireless devices.

So it is accessible to an AC power outlet and near Ethernet cables for wired computers.

In an elevated location such as a high shelf, keeping the number of walls and ceilings 
between the wireless modem router and your other devices to a minimum.

Away from electrical devices that are potential sources of interference, such as ceiling 
fans, home security systems, microwaves, computers, or the base of a cordless phone or 
2.4-GHz cordless phone.

Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large 
expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and 
concrete can also affect your wireless signal.

The DGND4000 should be put in a vertical position only.