Netgear DGND4000-100NAS 사용자 설명서

USB Drive Requirements

The wireless modem router works with 1.0 and 1.1 (USB Full Speed) and 2.0 (USB High 
Speed) standards. The approximate USB bus speeds are shown in the following table. Actual 
bus speeds can vary, depending on the CPU speed, memory, speed of the network, and 
other variables.

USB 1.1

12 Mbits

USB 2.0

480 Mbits

The wireless modem router should work with most USB-compliant external flash and hard 
drives. For the most up-to-date list of USB drives supported by the wireless modem router, 
visit:

The wireless modem router supports both read and write access for FAT16, FAT32, NTFS, 
and Linux file systems (EXT2 and EXT3).

Some USB external hard drives and flash drives require drivers to 
be loaded into the computer before the computer can access the 
USB device. Such USB devices do not work with the wireless 
modem router.

ReadySHARE Access

Once you have set up your wireless modem router, you can connect any USB storage device 
and share the contents with other users on your network.

You can access your USB device in any of the following ways:

On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, select Start > 
Run, and enter \\readyshare in the dialog box. Click OK.

On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, open Internet 
Explorer or Safari, and enter \\readyshare in the address bar.

On Mac OS X (version 10.2 or later), enter smb://readyshare in the address bar.

In My Network Places, enter \\readyshare in the address bar.