Netgear DGND4000-100NAS 사용자 설명서

USB Storage Advanced Settings

You can set up the device name, workgroups, and network folders for your USB device. On 
the Advanced tab, select USB Storage > Advanced Settings to display the following 
screen:

You can use this screen to specify access to the USB storage device. 

Network Device Name. The default is readyshare. This name is used to access the USB 
device connected to the wireless modem router. 

Workgroup. If you are using a Windows workgroup rather than a domain, the workgroup 
name is displayed here. The name works only in an operating system that supports 
NetBIOS, such as Microsoft Windows.

Access Method. The access methods are described here.

Network Connection. Enabled by default, this connection allows all users on the 
LAN to have access to the USB drive.

HTTP. Enabled by default. You can type http://readyshare.routerlogin.net/shares 
to access the USB drive.

HTTP (via internet). Disabled by default. If you enable this setting, remote users can 
type http://<public IP address>/shares (for example, http://1.1.10.102/shares) or a 
URL domain name to access the USB drive over the Internet. This setting supports 
file uploading only.

FTP. Disabled by default.

FTP (via internet). Disabled by default. If you enable this setting, remote users can 
access the USB drive through FTP over the Internet. This setting supports both 
downloading and uploading of files.