Netgear DGND4000-100NAS 사용자 설명서

Either you can use the Restore Factory Settings button on the back of the wireless modem 
router (see 

on page 149), or you can click the Erase button in this screen.

Erase sets the user name to admin, the password to password, and the LAN IP address to 
192.168.1.1, and enables the wireless modem router’s DHCP.

Set Password

This feature allows you to change the default password that is used to log in to the wireless 
modem router with the user name admin. 

This procedure is not the same as changing the password for wireless access. The label on 
the bottom of your wireless modem router shows your unique wireless network name (SSID) 
and password for wireless access (see 

on page 12).



Select ADVANCED > Administration > Set Password to display the following screen:

Type the old password, and type the new password twice in the fields on this screen.

If you want to be able to recover the password, select the Enable Password Recovery 
check box.

Click Apply so that your changes take effect.

Password Recovery

NETGEAR recommends that you enable password recovery if you change the password for 
the router’s user name of admin. Then you have an easy way to recover the password if it is 
forgotten. This recovery process is supported in Internet Explorer, Firefox, and Chrome 
browsers, but not in the Safari browser.