Netgear WNDR3800-100NAS 사용자 설명서

Factory Default Settings

You can restore the factory default configuration settings to reset the router’s user name to 
admin, 

the password to password, and the IP address to www.routerlogin.net. This 

procedure erases your current configuration, including your wireless security settings, and 
restores the factory defaults. When you log in after resetting, the Smart Wizard configuration 
assistant prompts you to configure these settings.



Use a sharp object such as a pen or a paper clip to press and hold the Restore Factory 
Settings

 button, located on the bottom of the router, for over 2 seconds until the Power 

LED turns to blinking amber.

Release the Restore Factory Settings button, and wait for the router to reboot. 

The factory default settings are restored so that you can access the router from your Web 
browser using the factory defaults.

Router login URL

www.routerlogin.net or www.routerlogin.com

User name (case-sensitive) 
printed on product label

admin

Password (case-sensitive) printed 
on product label

password

Internet MAC address

Use default hardware address

MTU size

1500

Router LAN IP address printed on 
product label (gateway IP address)

192.168.1.1

Router subnet

255.255.255.0

DHCP server

Enabled

DHCP range

192.168.1.2 to 192.168.1.254

Time zone

Pacific time

Time zone daylight savings time

Disabled

Allow a registrar to configure this 
router

Enabled

Wireless communication

Enabled

Wireless network names (SSIDs)

The unique default network name is printed on product label

2.4 GHz b/g/n guest network: NETGEAR-Guest

5 GHz a/n guest network: NETGEAR-5G-Guest

Security

The unique default password is printed on product label.