Netgear WNDR3800-100NAS 사용자 설명서

USB Storage Advanced Settings

You can set up the device name, workgroups, and network folders for your USB device. On 
the Advanced tab, select USB Storage > Advanced Settings to display the following 
screen:

You can use this screen to specify access to the USB storage device. 

. The default is readyshare. This is the name used to access the 

USB device connected to the router. 

. If you are using a Windows workgroup rather than a domain, the workgroup 

name is displayed here. The name works only in an operating system that supports 
NetBIOS, such as Microsoft Windows.

. The access methods are described here.

. Enabled by default, this connection allows all users on the LAN to 

have access to the USB drive.

. Enabled by default. You can type http://readyshare.routerlogin.net/shares to 

access the USB drive.

. Disabled by default. If you enable this setting, remote users can 

type http://public IP address/shares (for example, http://1.1.10.102/shares) or a URL 
domain name to access the USB drive over the Internet. This setting supports file 
uploading only.

. Disabled by default.

. Disabled by default. If you enable this setting, remote users can 

access the USB drive through FTP over the Internet. This setting supports both 
downloading and uploading of files.