Netgear WNDR3800-100NAS 사용자 설명서

enable the wireless base station in either radio band and use the other radio band as a 
wireless router or wireless base station, dual band concurrent mode is not affected.

For you to set up a wireless network with WDS, 

t

he following conditions have to be met for 

both access points:

Both access points have to use the same SSID, wireless channel, and encryption mode.

Both access points have to be on the same LAN IP subnet. That is, all the access point 

LAN IP addresses are in the same network.

All LAN devices (wired and wireless computers) have to be configured to operate in the 

same LAN network address range as the access points.

Wireless Repeating Function 

Select Advanced > Advanced Setup > Wireless Repeating Function to view or change 
wireless repeater settings for the router.

. Select the check box for the 

2.4 GHz or 5 GHz network to use the wireless repeating function.

. This field displays the MAC address for your router for your 

reference. You will need to enter this MAC address in the corresponding Wireless 
Repeating Function screen of the other access point you are using.

. If your router is the repeater, select this check box.

. If your router is the repeater, enter the IP address of the other 

access point.