IBM ARTIC186 사용자 설명서

Chapter 2. Installation and Requirements

This chapter lists the hardware and software/microcode requirements and provides information for
configuring and installing the 8-port adapter.

Installation Requirements

The 8-port adapter requires the following hardware, software, and microcode.

Hardware

A full-length ISA slot

Note: The FCC classification for this adapter might be different than the one of your system. After

installing the adapter, use the FCC classification of the adapter as your system classification.

One of the following interface cables or an equivalent (see Chapter 4, “Cables and Connectors” for a
description of the cables):

– 8-Port Direct Modem Attach Cable
– Multiport Interface Cable

Hardware Tools

Medium-size flat-blade screwdriver

Optional:
  – Medium screwstarter
  – 3/16-inch nutdriver
  – 1/4-inch nutdriver

Software/Microcode

See the Web site http://radisys.com/support/artic/ibm for a list of supported operating systems and support
programs.

The control program for the 8-port adapter is loaded into RAM on the adapter. The control program is part

of the realtime control microcode that can be downloaded from the Web. For downloading instructions,



2-1