Quatech SS-BLT-400 사용자 설명서

 

 

8

Follow the parameter setup procedures to configure the converter (see the 

following chapters). 

 
Terminator 

The purpose is for compensating signal attenuation in long distance 

connection at RS-485/RS-422 I/O. If the switch 1 & 2 are set in “ON” 

position, the signal compensation will be activated. To disable the function, 

just to push switch 1 & 2 to opposite position.

 

 

The purpose is for synchronizing between this Bluetooth To Serial 

Converter and “BT RS232 Config Tool” software.  After finishing the 

parameter setup of “BT RS232    Config Tool” software, when you click the 

icon of “Connect” in “BT RS232    Config Tool” software and then use any 

point tip to push this button immediately on the left side of the device. You 

will see the icon of “Connect” turn into “Disconnect” and the meaning is 

successful to active the device.