Printronix Integrated Network Interface Card 사용자 설명서

208 

store tn dest <dxprn>copytimeout<copytimeoutvalue>

See page 219 for store command descriptions.

list tn

list stored tn

list default tn

See page 248 for list command descriptions.

tn dest <dxprn>start|stop

See page 255 for a detailed description.

Set the following items when first configuring the NIC for use with 
an AS/400 running TN5250:

•

The IP address of the AS/400 you are planning to use.

Example: store tn dest d1prn as400 192.75.11.1

•

The device description or queue name you want built on the 
AS/400 for the printer. This must be unique to the printer.

Example: store tn dest d1prn devicedesc MOCHA3812

•

Enable the printer to autmatically connect to the AS/400 when it 
is first powered up or automatically reconnect if the original 
connection is lost.

Example: store tn dest d1prn autoconnect

In most circumstances, all other settings can be left as default. 
The printer should be reset (powered off and on again) for the 
settings to take effect.

If you do not wish the printer to connect automatically when 
powered up then leave the autoconnect disabled and control 
the connection manually with the following command: