Printronix Integrated Network Interface Card 사용자 설명서
Windows NT 4.0 Or 2000 Host Setup Problems
275
The Ethernet cable is not plugged in or the printer is not turned
on. This message is a communication failure between the
NT/2000 server and the NIC. Check cabling, IP address
settings, gateway, etc.
on. This message is a communication failure between the
NT/2000 server and the NIC. Check cabling, IP address
settings, gateway, etc.
•
Test page does not print or prints incorrectly:
1.
Is the printer online? Re-send test page.
2.
The print queue name should be d1prn; however, the name
can be changed. To verify the queue names, print an E-Net
Test Page. Refer to your
can be changed. To verify the queue names, print an E-Net
Test Page. Refer to your
User's Manual for information.
3.
The Printronix NT print driver requires P-Series emulation
active on the printer. The Generic/Text driver should print in
any printer emulation.
active on the printer. The Generic/Text driver should print in
any printer emulation.
4.
Delete then re-install the Microsoft TCP/IP Print service on the
server.
server.
If you are still experiencing difficulty accessing or browsing the
printer, contact the Customer Solutions Center for further
assistance.
printer, contact the Customer Solutions Center for further
assistance.