Proxim 7920 사용자 설명서
38
The Roam Config parameter allows you to determine how
quickly an Ethernet Adapter, set as a Station, will roam from one
Master Access Point to another. In areas with many
RangeLAN2 Access Points that provide heavy overlapping
coverage, set this parameter to Fast to maintain high throughput
for each of the wireless nodes.
quickly an Ethernet Adapter, set as a Station, will roam from one
Master Access Point to another. In areas with many
RangeLAN2 Access Points that provide heavy overlapping
coverage, set this parameter to Fast to maintain high throughput
for each of the wireless nodes.
In most networks, set the Roam Config parameter to Normal.
Wireless node throughput will not change noticeably, and an
overabundance of RangeLAN2 Access Points is not required.
Wireless node throughput will not change noticeably, and an
overabundance of RangeLAN2 Access Points is not required.
If the wireless coverage area provided by RangeLAN2 Access
Points is sparse, set the Roam Config parameter to Slow. Wire-
less nodes will not roam until they are nearly out of range of the
RangeLAN2 Access Point to which they are synchronized. This
parameter is visible only when the Ethernet Adapter is set as a
Station.
Points is sparse, set the Roam Config parameter to Slow. Wire-
less nodes will not roam until they are nearly out of range of the
RangeLAN2 Access Point to which they are synchronized. This
parameter is visible only when the Ethernet Adapter is set as a
Station.
Note:
Note that wireless clients can NOT roam between
multiple Ethernet Adapters set as Masters or between
a RangeLAN2 Access Point and an Ethernet Adapter.
RangeLAN2 products only support roaming between
Access Points and Extension Points.
Access Points and Extension Points.
You may choose to disable a RangeLAN2 Ethernet Adapter’s
ability to roam from one Master RangeLAN2 Access Point to
another with the Roaming Enabled parameter. This feature is
enabled by default and is visible only when the Ethernet Adapter
is set as a Station.
ability to roam from one Master RangeLAN2 Access Point to
another with the Roaming Enabled parameter. This feature is
enabled by default and is visible only when the Ethernet Adapter
is set as a Station.