Datalogic Scanning Matrix-1000 사용자 설명서

SOFTWARE CONFIGURATION 

 
 
Software configuration of your Matrix-1000

™ for static reading or simple code reading 

applications can be accomplished by the Autolearning Procedure (which requires no external 
configuration program or by using the VisiSet™ Autolearning Wizard for easy setup. These 
procedures are described in chapter 1. 
 
For all other applications, software configuration can be accomplished by VisiSet™ through 
the Matrix-1000™ auxiliary serial port. 
 
 

 
To install and run VisiSet™ you should have a Laptop or PC that meets or exceeds the 
following: 
•  Pentium processor 
•  Win 95/98/2000, NT 4.0 or XP 
•  32 MB Ram 
•  5 MB free HD space 
•  one free RS232 serial port with 115 Kbaud 
•  SVGA board (800x600) or better using more than 256 colors 
 
 

 
To install VisiSet™, proceed as follows: 

1.  Turn on the Laptop or PC that will be used for configuration (connected to the Matrix-

1000™ auxiliary port). 

2.  After Windows finishes booting, insert the CD-ROM provided. 

3.  Launch VisiSet™ installation by clicking Install. 

4.  Follow the instructions in the installation procedure.