Sharp AR-M236 사용자 설명서

This function collates the copies, staples each set, and delivers the sets to the offset tray. The staple sort function 
can only be used when a finisher is installed.

If the orientation of the originals does not match that of the copy paper, the images will be rotated. The stapling 
position varies with the orientation of the original.

Insert the originals face up.

Place each original face down.

When copying B4 or A3 (8-1/2" x 14" or 11" x 17") vertically oriented originals, the copies will be stapled at the 
position shown below.

Top left corner

Available paper sizes:
A4 and B5 (8-1/2" x 11")
Stapling capacity:
For each size, up to 30 sheets 
can be stapled.

Available paper sizes: A3, B4 
and A4R, (11" x 17", 8-1/2" x 
14", 8-1/2" x 13", 8-1/2" x 11" R)
Stapling capacity: 
For each size, up to 30 sheets 
can be stapled.

Stapling position

Stapling position

• When using letterhead paper in the staple sort, load the paper with the 

letterhead to the front or to the right as shown in the diagram.

• Different sized originals cannot be copied on the corresponding sizes of paper.
• The staple sort function cannot be used if disabled in the key operator programs. (See the "Key operator’s 

guide".)

• The offset function (p.35) cannot be used.

Stapling position

Stapling position

SHARP

SHARP