Toshiba NB200 사용자 설명서

User’s Manual

9-5

Troubleshooting

If you suspect a problem with the battery, check the DC IN connect and the 

battery indicator. For information on indicators and battery operation see 

Chapter 6, 

Battery doesn’t power 

the computer 

The battery may be discharged - connect the AC 

adaptor to recharge the battery. 

Battery doesn’t charge 

when the AC adaptor 

is attached (Battery 

indicator does not 

glow amber).

If the battery is completely discharged, it will not 

begin charging immediately. Wait a few minutes.

If the battery still does not charge, make sure the 

outlet is supplying power. Test it by plugging in an 

appliance. If it doesn’t work, try another power 

source

Check whether the battery is hot or cold to the 

touch. If the battery is too hot or too cold, it will 

not charge properly. Make it reach room 

temperature.

Unplug the AC adaptor and remove the battery to 

make sure the terminals are clean. If necessary 

wipe them with a soft dry cloth dipped in alcohol.
Connect the AC adaptor and replace the battery. 

Make sure it is securely seated.

Check the Battery indicator. If it does not glow, 

make the computer charge the battery for at least 

20 minutes. If the Battery indicator glows after 20 

minutes, make the battery continue to charge at 

least another 20 minutes before turning on the 

computer.

If the indicator still does not glow, the batterymay 

be at the end of its operating life. Replace it.
If you do not think the battery is at the end of its 

operating life, see your dealer.

Battery doesn’t power 

the computer as long 

as expected

If you frequently recharge a partially charged 

battery, the battery might not charge to its full 

potential. Fully discharge the battery, then try to 

charge it again.

Check the power consumption settings in Power 

Management. Consider using a power saving 

mode.