Toshiba NB200 사용자 설명서
User’s Manual
8-6
Optional Devices
5. Seat the memory module cover in place and secure it with one screw.
1. memory module cover
2. screw
2. screw
Figure 8-3 Seating the memory module cover
6. Install the battery pack - refer to
section in
Chapter 6,
, if required.
7. Turn your computer over.
8. Turn the computer on and make sure the added memory is recognized -
8. Turn the computer on and make sure the added memory is recognized -
to confirmed it, Start
J
Control Panel
J
Performance and
Maintenance
J
System icon.
Removing a memory module
To remove the memory module, follow the steps as detailed below:
1. Turn the computer off and remove all cables connected to the
1. Turn the computer off and remove all cables connected to the
computer.
■
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer or keyboard. Foreign metal objects can create a
short circuit, which can cause computer damage and fire, possibly
resulting in serious injury.
■
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
Take care to ensure that the memory module cover is firmly closed.
1
2