Atlantis Land i I-Fly Wireless Access Point 사용자 설명서

The I-Fly Wireless Access Point can be configured with your Web browser.  The web browser is 
included as a standard application in the following operation systems, UNIX, Linux, Mac OS, 
Windows 95/98/NT/2000/Me/XP, and etc. The product provides a very easy and user-friendly 
interface for configuration. With  

This section describes the configuration required by LAN-attached PCs that communicate with the 
I-Fly Wireless Access Point, either to configure the device or for network access. These PCs must 
have an Ethernet interface installed properly, be connected to the AP either directly or through an 
external repeater hub, and have TCP/IP installed and configured to obtain an IP address through a 
DHCP server or a fixed IP address that must be in the same subnet of the AP. The default IP 
address of the ADSL Firewall AP is 192.168.1.1 and subnet mask is 255.255.255.0. The best and 
easy way is to configure the PC to get an IP address from the AP. Also make sure you have 
UNINSTALLED any kind of software firewall that can cause problems while accessing the 
192.168.1.1 IP address of the AP. 
Please follow the steps below for PC’s network environment installation. First of all, please check 
your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be 
installed.  
 

Any TCP/IP capable workstation can be used to communicate with or through 
the AP. To configure other types of workstations, please consult the 
manufacturer’s documentation. 

 

•  Power on the device 

•  Make sure the PWR(green) Leds are OK  & LAN (or WLAN)  Led is lit 

•  Connect PC directly to the AP by cable or Wireless 
•  Before taking the next step, make sure you have uninstalled any software firewall