StarTech.com EC1000S 사용자 설명서

2

Installation

Hardware Installation

The ExpressCard adapter will simply slide into the ExpressCard slot 
on any compatible system. Push the card all the way in, until it ‘clicks’ 
and locks into place. To eject the card, simply push the card further into 
the slot until it clicks, and then release and it will then be automatically 
ejected from the slot.
NOTE: Some ExpressCard/54 slots do not firmly hold an 
ExpressCard/34 card so a 34mm to 54mm stabilizer bracket may be 
necessary (StarTech.com ID: ECBRACKET).
Connect the Ethernet cable from your router/switch/LAN drop to the 
RJ45 connector on the card.  The “gigabit” LED should light up when 
connected at gigabit speeds while the “100” LED should light up when 
connected to 100Mbps speeds.  No LED will light up when connected 
at 10Mbps speeds.

Driver Installation

When the Found New Hardware wizard appears on the screen, 

1. 

insert the Driver CD into your CD/DVD drive. If you are prompted 
to connect to Windows Update, please select the “No, not this time” 
option and click Next.
Select the option “Install Drivers Automatically (Recommended)” and 

2. 

then click the Next button.
Windows should now start searching for the drivers. Once this has 

3. 

completed, click the Finish button.

When the Found New Hardware window appears on the screen, 

1. 

click on the “Locate and install drivers software (recommended)”