Cisco Systems 700 MHz 사용자 설명서

Trunk card interface cable assemblies (50-pin Amphenol cables). The number of trunk card 
interface cable assemblies that you receive depends on how many and the type of Multi Access 
Blades in the Cisco Unified MeetingPlace system. Cisco Systems ships two cables with each 
MP-MA-16-PRI and one cable with each MP-MA-4-PRI.

Before mounting the Cisco Unified MeetingPlace Audio Server in a rack, confirm that you have met all 
the requirements in the 

 or the 

.

The Cisco Unified MeetingPlace 8100 series servers can be mounted in two types of racks:

When mounting the Cisco Unified MeetingPlace Audio Server in a Frame-Relay rack, which is common 
in central office locations, the Cisco Unified MeetingPlace 8106 is held along the front of the chassis 
and the Cisco Unified MeetingPlace 8112 is held along the center of the chassis.

After mounting the Cisco Unified MeetingPlace Audio Server, mount the breakout box, if applicable. 
See the 

.

The Cisco Unified MeetingPlace 8106 ships with two mounting brackets already attached to the front of 
it (see 

). The long sides of the brackets are fastened to the Cisco Unified MeetingPlace 8106.

Slide the Cisco Unified MeetingPlace 8106 into the front of the rack.

19-inch Frame-Relay rack. 

See the 

19-inch Electronic Industries Alliance (EIA) equipment rack.

See the 

.

19- or 23-inch Frame-Relay rack. 

See the 

.

19- or 23-inch Electronic Industries Alliance (EIA) equipment 
rack. 

See the 

.