Cisco Systems 700 MHz 사용자 설명서

Cisco Systems ships the necessary number of Multi Access Blades with all Cisco Unified MeetingPlace 
Audio Server systems with E1 and T1 PRI configurations. A Cisco Unified MeetingPlace 8106 supports 
three Multi Access Blade configurations, and a Cisco Unified MeetingPlace 8112 supports five 
configurations:

Cisco Unified MeetingPlace Audio Servers with E1 and T1 PRI configurations also ship with either one 
or two breakout boxes and cables, depending on the Cisco Unified MeetingPlace system configuration.

A Cisco Unified MeetingPlace system that is fully loaded with 960 E1 ports has two MP-MA-16-PRIs 
and requires two breakout boxes. A Cisco Unified MeetingPlace system that is fully loaded with 736 T1 
PRI ports has two MP-MA-16-PRIs and requires two breakout boxes. Both these configurations need a 
Cisco Unified MeetingPlace 8112.

The breakout box provides a standard RJ-45 telephony interface for E1 and T1 PRI Cisco Unified 
MeetingPlace systems. Cisco Systems ships the necessary number of trunk card interface cable 
assemblies (50-pin Amphenol cables) that connect the breakout box to the Multi Access Blade transition 
modules. 

 shows the 50-pin Amphenol cable.

One Multi Access Blade MP-MA-16-PRI

One Multi Access Blade MP-MA-4-PRI

Two Multi Access Blade MP-MA-4-PRIs

One Multi Access Blade MP-MA-16-PRI

One Multi Access Blade MP-MA-4-PRI

Two Multi Access Blade MP-MA-4-PRIs

One Multi Access Blade MP-MA-16-PRI and one Multi Access 
Blade MP-MA-4-PRI

Two Multi Access Blade MP-MA-16-PRIs