Cisco Systems 700 MHz 사용자 설명서
2-35
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
About Telephony Configurations for Mixed Cisco Unified MeetingPlace Systems
Figure 2-28
Back of Cisco Unified MeetingPlace 8112 (Mixed Configuration with 480 E1 and 480
IP Ports)
IP Ports)
Connecting the Telephony Cables for a T1 CAS/IP Cisco Unified MeetingPlace
System
System
To Connect the Telephony Cables for a T1 CAS/IP Cisco Unified MeetingPlace System
Step 1
Locate the following items that shipped with the Cisco Unified MeetingPlace Audio Server:
•
IP LAN cables.
•
T1 CAS telephony cables.
Step 2
Attach the far end of the first T1 CAS telephony cable to the equipment that will connect with Cisco
Unified MeetingPlace.
Unified MeetingPlace.
In many cases, the other equipment has an RJ-48c socket in which to plug the T1 CAS telephony cable.
Alternately, the other equipment will be connected to a punchdown block. In this case, you will need to
determine the block's connection diagram and then connect to it with discrete wires from the cable.
Alternately, the other equipment will be connected to a punchdown block. In this case, you will need to
determine the block's connection diagram and then connect to it with discrete wires from the cable.