Cisco Systems 700 MHz 사용자 설명서

The chapter contains the following sections:

If you cannot connect to the Cisco Unified MeetingPlace Audio Server system by using MeetingTime, 
try any or all of the following tasks:

Enter ping to ping a known good IP address to determine if the network can access the Cisco Unified 
MeetingPlace Audio Server system.

Confirm with the network administrator that Cisco Unified MeetingPlace has been set up in the local 
host file.

Check that you performed all the steps in the 

.

Check the network cabling.

If possible, use a PC to check the LAN connectivity.

Verify the network configuration by entering the net command.

Verify the IP address, subnet mask, and default gateway values.

Make sure that all cards and transition modules are seated properly.

Check all cables and connections.

For CLI command information, refer to the “Command-Line Interface Reference” appendix of the 
Configuration Guide for Cisco Unified MeetingPlace Audio Server at 

.

If these actions do not correct the problem, contact Cisco TAC. See the 

.