Netgear WG111U 사용자 설명서

Basic Setup

3-3

Follow these instructions to use the USB cable, plastic cradle, and fasteners provided in the 
package for better USB Adapter placement on a notebook computer:

1.

The WG111U Wireless USB 2.0 Adapter comes with three black fasteners. Locate the one that 
has a prickly side and attach it to the plastic cradle on the middle of the outside rear.

2.

Insert the WG111U Wireless USB 2.0 Adapter in the plastic cradle.

3.

Place one of the other black fasteners on the back of your notebook monitor near the top for 
better reception.

Note: If you are using the USB Adapter with a desktop PC, you can place the last fastener on 
the side of your desktop PC monitor nearest your wireless access point.

4.

Join the black fasteners to attach the USB Adapter in the plastic cradle to the notebook or 
desktop monitor.

See the installation instructions for your operating system before attaching the USB cable to the 
USB Adapter and your computer.

The WG111U Wireless USB 2.0 Adapter can operate in the following two modes:

•

: An 802.11 networking framework in which devices and computers 

communicate with each other by first going through an access point (AP). For example, this 
mode is used when computers in a house connect to an Access Point that is attached to a router 
that lets multiple computers share a single cable or DSL broadband Internet connection.

•

: An 802.11 networking framework in which devices or computers 

communicate directly with each other, without the use of an AP. For example, Ad-Hoc Mode 
is used when two Windows computers are configured with file and print sharing enabled and 
you want to exchange files directly between them.