Netgear WG111U 사용자 설명서

Appendix C-2

Preparing Your Network to Work with a Router

For the initial setup of your router, you will need to connect a computer to the router. This 
computer has to be set to automatically get its TCP/IP configuration from the router via DHCP.

Note: For help with DHCP configuration, please use the Windows TCP/IP Configuration Tutorials 
on the Resource CD.

Depending on how your Internet service set up your account, you may need one or more of these 
configuration parameters to connect your router to the Internet: 

•

Host and Domain Names

•

ISP Login Name and Password

•

ISP Domain Name Server (DNS) Addresses

•

Fixed IP Address, which is also known as the Static IP Address

There are several ways you can gather the required Internet connection information:

•

Your Internet service provides all the information needed to connect to the Internet. If you 
cannot locate this information, you can ask your Internet service provider to provide it or you 
can try one of the options below.

•

If you have a computer already connected to the Internet, you can gather the configuration 
information from that computer.

— For Windows 95/98/ME, open the Network control panel, select the TCP/IP entry for the 

Ethernet adapter, and click Properties. Record all the settings for each tab page.

— For Windows 2000/XP, open the Local Area Network Connection, select the TCP/IP entry 

for the Ethernet adapter, and click Properties. Record all the settings for each tab page.

— For Macintosh computers, record the settings in the TCP/IP or Network control panel. 

•

You may also refer to the Resource CD or the NETGEAR Router ISP Guide, which provides 
Internet connection information for many ISPs.

Once you locate your Internet configuration parameters, you may want to record them on the page 
below.