Avaya S8500 사용자 설명서

The following section explains how to connect the Ethernet ports on the back of the media 
server.

Use standard CAT5 cables with RJ45 connectors on each end to connect to the various ports. If 
the S8500 Media Server has only one port network, connect that port network through the dual 
NIC. 

 shows typical connectivity for the 

S8500B Media Server. 

on page 20 shows 

typical connectivity for the S8500C Media Server. 

1. Eth0—To the customer network if the 

control network is shared. Or, to the 
control-network Ethernet switch if the 
control network is dedicated 
(straight-through CAT5 cable)

2. Eth1—To the Services laptop computer 

(cross-over CAT5 cable)

3. Eth2—to the customer network if the 

control network is dedicated 
(straight-through CAT5 cable)

4. Eth3—Not used

2

1

2

h3msbl5d LAO 052506

1