Avaya S8500 사용자 설명서

You must administer the primary controller so that the controller can identify and communicate 
with the S8500 LSP.

1. At the SAT command line, type change node-names ip name and press Enter, 

where name is the name of the LSP.

2. In the Name column, type the name of the LSP.

3. In the IP Address column, type the IP address of the LSP.

4. At the SAT command line, type add survivable-processor name and press Enter, 

where name is the LSP name from the Node Names screen. 

The system displays the Survivable Processor screen.

5. The Type field is automatically populated with LSP. LSP appears in the field if the node 

name is not associated with ESS. 

6. Enter a network region for the LSP. The default is 1. However, a different network region 

might be better suited for the LSP to provide media gateway and IP telephone support. 

7. On pages 2 and 3 of the screen, add any adjuncts that the LSP can support if a failover 

from the primary controller occurs. 

For how to administer the Survivable Processor form, see Administrator Guide for Avaya 
Communication Manager (03-300509).

If a G250 or G350 Media Gateway provides the serial number, access the administration level 
command line of the media gateway and run the command ip license-server. If a G700 Media 
Gateway provides the serial number for the S8500 LSP license, skip this step and continue with 

add survivable-processor sv-mg2-lsp

Page   1 of  xx 

 

SURVIVABLE PROCESSOR - PROCESSOR ETHERNET

 

Node Name: sv-mg2-lsp

IP Address: 128.256.173.101

Type: LSP

Network Region: 1