Motorola IH5 사용자 설명서
TMCPN710 Transition Module
http://www.motorola.com/computer/literature
7-19
7
TMCPN710 Transition Module COM1 Connector (J6)
An RJ45 connector is located on the rear panel of the TMCPN710
Transition Module to provide the interface to the COM1 serial port. The
TMCOM1 signal jumper, J7 pins 2 and 3 on the Transition Module, must
be installed to enable COM1 on the Transition Module. The pin
assignments for this connector is as follows:
Transition Module to provide the interface to the COM1 serial port. The
TMCOM1 signal jumper, J7 pins 2 and 3 on the Transition Module, must
be installed to enable COM1 on the Transition Module. The pin
assignments for this connector is as follows:
Table 7-10. TMCPN710 COM1 Connector (J6)
1
DCD
2
RTS
3
GND
4
TXD
5
RXD
6
GND
7
CTS
8
DTR