Perle Systems Adaptors 사용자 설명서

UltraPort Serial Adaptors User Guide
Installing under Solaris

Page 82

Chapter 2 Installing drivers and host cards

In the Admintool: Modify Serial Port window you can click on the Expert button to show 
more fields, as shown in the next picture.

4. In the Admintool: Modify Serial Port window, set the parameters you require.

5. In the Admintool: Modify Serial Port window, click on OK to accept the changes you have 

made and close the window.

6. Repeat steps 

 to 

 until you have configured the serial ports for all the host cards  you 

require.

7. In the Serial Manager menu click on Host > Quit to quit Serial Manager and close the 

window.

Note

Because the system does not support the selection of speeds above 
460800 bps, lower baud rates have been permanently remapped to support 
higher port speeds. Remapped speeds are shown in the next table.

50

921600