Barco 26-0405000-00 사용자 설명서
PresentationPRO-II • User’s Guide
15
2. Hardware Orientation
PresentationPRO-II Front Panel
mêÉëÉåí~íáçåmolJff=cêçåí=m~åÉä
The figure below illustrates the PresentationPRO-II front panel:
Figure 2-1. PresentationPRO-II Front Panel
Following are descriptions of each front panel control feature:
1)
Chassis Handles
Two Chassis Handles are provided for ease of installation and transportation.
2) Touch Screen Menu Section
The Touch Screen Menu Section is used for system configuration, setup and
operational adjustments of PIPs and keys. Refer to the “
operational adjustments of PIPs and keys. Refer to the “
3) Layer
Functions
Section
The Layer Functions Section is the operational heart of the PresentationPRO-II,
enabling you to select layers, modes, and perform transitions. Refer to the “
enabling you to select layers, modes, and perform transitions. Refer to the “
” heading on page 19 for details.
4) Source
Selection
Bus
The Source Selection Bus allows you to choose the PIP or Key source.
~
On the SDI model, up to eight analog sources plus one SD-SDI source
can be routed to the PIP or Key.
can be routed to the PIP or Key.
~
On the HD model, up to eight analog sources plus one HD-SDI/SD-SDI
source can be routed to the PIP or Key.
source can be routed to the PIP or Key.
Refer to the “
” section on page 18 for details.
5) PresentationPRO-II
Model
This section displays the PresentationPRO-II model, either SDI or HD.
Figure 2-2. PresentationPRO-II Model Labels
4
1
3
5
2
1)
3)
5)
2)
4)
H D - S D I
S D I