Canon 700 Series 사용자 설명서

Sending a Document to a Relay Unit for Relay Broadcasting

Using a Rela

y Netw

or

k

You can register a telephone number for relay sending under a one-touch speed 
dialing key or a coded speed dialing code.

Check these points before you send a document to another party for relay 
broadcasting:

• Contact the other party and ask for the ITU-T subaddress and password they are 

using for receiving documents they are to relay.

• The other party’s fax machine does not have to be a Canon fax machine, but make 

sure the other party’s fax machine supports the use of ITU-T subaddresses and 
passwords.

• Perform the procedure to register a telephone number for one-touch or coded 

speed dialing. (See “Setting Up One-Touch Speed Dialing,” on p. 2-6, or “Setting 
Up Coded Speed Dialing,” on p. 2-15.)

• If the speed dialing keys are already set up, perform the procedure to change the 

one-touch or coded speed dialing settings. (See “Setting Up One-Touch Speed 
Dialing,” on p. 2-6, or “Setting Up Coded Speed Dialing,” on p. 2-15.)

• When you setup the speed dialing settings, turn ‘ON’ the OPTIONAL SETTING 

feature, and select ‘TX TYPE’. Select ‘ORIG RELAY TX’, and set the ITU-T 
subaddress and password. (See “Setting Up One-Touch Speed Dialing,” on p. 2-6, 
or “Setting Up Coded Speed Dialing,” on p. 2-15.)

• Confirm that the other party is set up properly to relay documents received from 

your machine. Your machine cannot automatically confirm whether the other 
party’s machine has been set up properly for relaying a document sent from your 
machine.

Follow the procedure below to send a document for a relay broadcast with the 
Advanced Communication key.

NOTE

You can set only specify one destination for the relay unit.