Canon 700 Series 사용자 설명서
Setting Up and Using PIN Codes
10-9
Other Special F
eatures
10
5
Press [Start].
NOTE
To enter the PIN code immediately, press
(Start). Otherwise, the machine waits
five seconds before it displays <ENTER PIN CODE>. This timeout feature can be
turned ‘OFF’. (See “TX (Send) Settings,” on p. 11-14.)
turned ‘OFF’. (See “TX (Send) Settings,” on p. 11-14.)
6
Enter the PIN code (up to 20 digits, including , #, and spaces)
using the numeric keys.
using the numeric keys.
The PIN code is not displayed as you enter it.
7
Press [Set].
Transmission starts.
Dialing with a PIN Code before the Number
If you set <NECESS. PIN CODE> of the PIN Code setting to ‘OFF’, you can
perform the procedure described below. (See “Setting a PIN Code,” on p. 10-6.)
perform the procedure described below. (See “Setting a PIN Code,” on p. 10-6.)
1
Place your documents on the machine.
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
• You can adjust the resolution, contrast, and document type for scanning. (See
• You can also specify a sender’s name with [TTI Selector]. (See “Selecting a
Start
4
1
7
5
2
8
6
3
9
0
Set