Canon 700 Series 사용자 설명서

Error Code Table (Listed by Number)

T

roub

leshooting

Errors in reports are recorded as numbers because there is not enough space to 
print a detailed description of the error in the report. When errors are recorded in 
reports, note the error code number, and check it against the table below to learn 
more about what caused the error and how to remedy it.

#0001

Cause 

A document may be jammed in the ADF (Automatic Document Feeder) when 
using direct sending.

Remedy

Remove the jammed document and try again. (See Chapter 7, 
“Troubleshooting,” in the Reference Guide.)

#0003

Cause

The document is longer than 39 3/8'' inches (1 meter) or it has taken more than 
32 minutes to send the document when using direct sending.

Remedy

Make a reduced copy of the document with a copy machine, then send the copy. 
You can also cut the document to the effective scanning size for faxing or 
copying. (See “Document Size,” on p. 14-5.)

#0005

Cause 1

The other party’s fax machine did not respond within 55 seconds.

Remedy

Send the document again. Contact the other party and have them check their 
fax machine. You can try to send the document manually. If you are making an 
overseas call, add pauses to the registered number.

Cause 2

The other party is not using a G3 fax machine.

Remedy

Check with the other party, and send the document to a G3 fax machine. If the 
other party does not have a G3 fax machine, try sending your document using a 
transmission mode that the other party supports.