Canon 700 Series 사용자 설명서

List of LCD Display Messages (Alphabetical List)

T

roub

leshooting

Below is a list of messages that are displayed on the screen when a problem 
occurs in the machine.

# ALREADY IN USE

Cause 

The box number you entered is already in use. For example, you cannot use the 
same box number for a confidential mailbox and a polling box.

Remedy

Select another box number.

AUTO REDIAL

Cause

The other party’s line was busy on the previous dialing attempt and your 
machine is dialing the number again.

Remedy

To cancel redialing, press [Stop] if you are using Direct Sending. If you are using 
Memory Sending, press [Delete File] 

➞ select the transaction number ➞ press 

[Set].

CHECK DOCUMENT

Cause 

A document page may be jammed or may not have been fed correctly by the 
ADF (Automatic Document Feeder).

Remedy 1 Clear the paper jam, and try placing the document again. (See Chapter 7, 

“Troubleshooting,” in the Reference Guide.)

Remedy 2 If the document does not feed correctly, clean the rollers. (See Chapter 7, 

“Troubleshooting,” in the Reference Guide.)

CHECK PRINTER

Cause

Printer malfunction.

Remedy

Press [Stop]. Disconnect the machine from its power source, wait a few minutes, 
then connect the power cord to the power outlet. If the machine is connected to 
a UPS (Uninterruptable Power Source), disconnect the power cord, and plug it 
into an AC outlet. If the message remains on the LCD display and the machine 
does not return to the Standby mode, call your local authorized Canon dealer.