Canon 700 Series 사용자 설명서

When Trouble Occurs

T

roub

leshooting

If an error occurs during sending or receiving, or there is malfunction in the 
machine, check the following causes and remedies.

Cannot send document after dialing.

Cause 1

The documents are not correctly set in the ADF (Automatic Document Feeder).

Remedy

Remove the documents, and set them correctly on the machine. (See “Setting 
the Document on the Machine,” on p. 3-3.)

Cause 2

The number is not dialed correctly.

Remedy

Check the number registered under the speed dialing key, and make sure it is 
correct. You may want to print a list of all registered speed dialing numbers that 
are assigned to keys or codes. If you do not have time to check and correct the 
registered number immediately, use regular dialing. (See “Printing the Speed 
Dialing Lists,” on p. 12-2, and “Using Speed Dialing,” on p. 2-32.)

Cause 3

The transmission speed is too fast for the telephone lines in your area, or the 
telephone lines in your area may be in poor condition.

Remedy

Select a slower transmission speed.

Cause 4

The other fax machine is out of paper.

Remedy

Call the other party, and make sure their fax machine is supplied with paper.

The memory fills up immediately when you try to send.

Cause 1

You are using high-resolution scan settings such as ‘Fine’, ‘Super Fine’, ‘Ultra 
Fine’, or ‘Text/Photo’.

Remedy

The ‘Fine’, ‘Super Fine’, ‘Ultra Fine’, or ‘Text/Photo’ settings can use large 
amounts of memory when scanning certain types of documents. Use the 
standard scanning mode and direct sending to send your document. (See 
“Direct Sending,” on p. 3-18.)