Canon 700 Series 사용자 설명서

Setting a Document for Sending

Sending Documents

This section explains how to place your documents on the machine.

Follow these simple guidelines to check your document before you set your 
document on the machine for scanning.

IMPORTANT

• For best results, load only documents of recommended standard size and weight. (See 

•

To avoid paper jams, never feed thick documents or documents backed with carbon 
paper.

•

To avoid paper jams and possible damage to the machine, avoid wrinkled or creased 
paper, carbon paper, curled paper, coated paper, and onion skin or other very thin 
papers.

•

To avoid paper jams or damaging the machine, inspect the documents carefully and 
make sure they are free of pins, staples, paper clips, and other metal fasteners.

•

Make sure all the documents are dry. They should not have wet ink, glue, or paste on 
their surfaces.

•

Before you feed a stack of documents into the machine, make sure all the pages are of 
the same size and thickness. Do not attempt to feed documents of mixed sizes and 
thicknesses in the same stack.

NOTE
• The document guides on the document feeder tray can be adjusted to fit the width of 

nonstandard size paper. For best results, all of the sheets in the stack should be of the 
same width.

• Although the document guides on the document feeder tray indicate that 11" x 17" paper 

can be placed in the document feeder tray, the effective scanning width is up to 10" (B4) 
paper.

• For documents that are larger or smaller than these recommended sizes, reduce or 

enlarge them on a copy machine, then send the copy. (See “Documents You Can Scan,” 
on p. 14-4.)

• The machine does not scan completely to the edges of the paper, and anything beyond 

this recommended margin is not scanned for sending. (See “Documents You Can Scan,” 
on p. 14-4.)