Diamond Systems 16-Channel 12-Bit Analog Output PC/104 Module 사용자 설명서
Copyright 2001 Diamond Systems Corp. Ruby-MM-1612 User Manual V1.1 P. 4
2. I/O HEADER PINOUT
Ruby-MM-1612 provides a 50-pin right-angle header labeled J3 for all user I/O. This header is located on
the right side of the board. Pins 1, 2, 49, and 50 are marked to aid in proper orientation. A standard 50-pin
cable-mount IDC (insulation displacement contact) connector will mate with this header.
the right side of the board. Pins 1, 2, 49, and 50 are marked to aid in proper orientation. A standard 50-pin
cable-mount IDC (insulation displacement contact) connector will mate with this header.
J3
(Top of board)
Agnd
1
2
Vout 0
Agnd
3
4
Vout 1
Agnd
5
6
Vout 2
Agnd
7
8
Vout 3
Agnd
9
10
Vout 4
Agnd
11 12
Vout 5
Agnd
13 14
Vout 6
Agnd
15 16
Vout 7
Vout 8
17 18
Vout 9
Vout 10
19 20
Vout 11
Vout 12
21 22
Vout 13
Vout 14
23 24
Vout 15
DIO A7
25 26
DIO A6
DIO A5
27 28
DIO A4
DIO A3
29 30
DIO A2
DIO A1
31 32
DIO A0
DIO B7
33 34
DIO B6
DIO B5
35 36
DIO B4
DIO B3
37 38
DIO B2
DIO B1
39 40
DIO B0
DIO C7
41 42
DIO C6
DIO C5
43 44
DIO C4
DIO C3
45 46
DIO C2
DIO C1
47 48
DIO C0 / Ext Trig
+5V
49 50
Dgnd
Signal Name Definition
Vout15 - 0 Analog output channels
Agnd Analog ground
DIO A7-0, B7-0, C7-0 Digital I/O lines (programmable direction)
Ext Trig Digital I/O line C0 can be used as an external D/A update signal
+5V Connected to PC/104 bus +5V power supply
Dgnd Digital ground
Agnd Analog ground
DIO A7-0, B7-0, C7-0 Digital I/O lines (programmable direction)
Ext Trig Digital I/O line C0 can be used as an external D/A update signal
+5V Connected to PC/104 bus +5V power supply
Dgnd Digital ground
⇒
⇒
Note: The +5V and Dgnd lines do not need to be connected to a power supply to use this board. They
are provided as connection points for convenience purposes only.