Yamaha RX-SL80 사용자 설명서
17
Eng
lish
BASIC SETUP
PREP
ARA
TION
6
Press
/
repeatedly to select SWFR.
Use / to select YES or NONE.
YES
If you have a subwoofer in your system.
NONE
If you do not have a subwoofer in your
system.
system.
7
Press
/
repeatedly to select SPEAKERS.
Use / to select the number of speakers connected
to the unit. The choices vary as follows:
to the unit. The choices vary as follows:
8
After you have finished the settings, press
repeatedly to select SET CANCEL.
Use / to select SET or CANCEL, then press
ENTER.
ENTER.
SET
To apply the changes and start the test
tone.
tone.
CANCEL
To cancel the changes and return to
SET MENU.
SET MENU.
Use the test tone to check the speaker levels.
If you selected SET, the display changes to:
If you selected SET, the display changes to:
and the unit outputs a test tone from each speaker in
turn.
When the test tone begins, the display changes to:
turn.
When the test tone begins, the display changes to:
• The unit cycles the test tone around each of the speakers in turn
twice.
• The indicator of the speaker currently outputting the test tone
flashes in the front panel display.
9
Press /
repeatedly
to select YES or NO,
then press ENTER.
If you want to change the speaker level after you hear
the test tone select “NO”.
the test tone select “NO”.
YES
To return to SET MENU.
NO
To enter B)SPEAKER LEVEL.
■
Speaker level
B)SPEAKER LEVEL
Use this menu to compare and adjust the test tone
output from each speaker to the output from the left
front (or left surround) speaker so that the volume
level for all speakers is identical.
output from each speaker to the output from the left
front (or left surround) speaker so that the volume
level for all speakers is identical.
Press
/
to select a speaker and adjust the
balance using /
.
The unit outputs the test tone from the selected speaker
and the left front (or left surround) speaker in turn. The
indicator of the speaker currently outputting the test tone
flashes in the front panel display.
and the left front (or left surround) speaker in turn. The
indicator of the speaker currently outputting the test tone
flashes in the front panel display.
FR
adjusts the balance between the front left and right
speakers.
C
adjusts the balance between the front left and center
speakers.
SL
adjusts the balance between the front left and surround
left speakers.
SR
adjusts the balance between the surround left and
surround right speakers.
SWFR
adjusts the balance between the front left speaker
and the subwoofer.
y
You can also make test tone setting adjustments by pressing
TEST on the remote control.
TEST on the remote control.
Choices
Display
Speakers
2 spk
Front L/R
3 spk
Front L/R, Center
4 spk
Front L/R, Surround L/R
5 spk
Front L/R, Center, Surround L/R
Notes
L
L
C
R
SL SB SR
L
L C R
SL SB SR
L
L
C
R
SL
SB
SR
L
L C R
SL SB
SB SR
; BASIC SETUP
ROOM : )S M L
SWFR : )YES NONE
SPEAKERS;;;;5spk
.CHECK: Test Tone
; BASIC SETUP
ROOM : )S M L
SWFR : )YES NONE
SPEAKERS;;;;5spk
.CHECK OK?;;;;YES
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
-+
.FR
C
SL
B)SPEAKER LEVEL
-+
.SR
SWFR
B)SPEAKER LEVEL