Husqvarna Pro 18 AWD 사용자 설명서
22
– English
Page
25
50
100 300
Maintenance
Maintenance Schedule
The following is a list of maintenance procedures that must be performed on the rider. For points marked
with footnote number 4, turn to an authorised service representative.
with footnote number 4, turn to an authorised service representative.
● = Described in this operator’s manual.
❍ = Not described in this operator’s manual.
Daily main-
tenance
before after
MAINTENANCE
Maintenance
interval hours
Weekly
3)
main-
tenance
At least
once
a year
Check for fuel and oil leaks
-
❍
Check the parking brake
15
●
Check the engine’s oil level (every refuelling)
59
●
Check the fuel pump’s air filter
28
●
●
Check the safety switch, seat
33
●
Check the safety switch, lifting lever
33
●
Check the safety switch, pedal system
33
●
Check/clean the engine’s cooling air intake.
31
●
●
Check the cutting unit:
45
●
• mounting of blades
51
●
• condition of the blades (sharpness, shape, etc)
51
●
Check the steering cables (any play, etc.)
25
●
Check fastenings (screws, nuts, etc.)
-
❍
Start the engine and blades,
listen for abnormal sounds
listen for abnormal sounds
-
❍
Clean under the cutting unit
48
●
Clean the transmission’s cooling air intake
28
●
●
Inspecting the muffler
27
●
Check the battery’s acid level
31
●
Check the transmission oil level
61
●
Check the condition of belts, belt pulleys, etc.
-
❍
Check for damage
-
❍
Check the tyre pressures (60 kPa / 9 PSI)
35
●
Check to ensure that the cable holder
in the middle is undamaged
in the middle is undamaged
-
❍
Clean thoroughly around the engine
31
●
Clean carefully around the muffler
31
●
Clean thoroughly around the transmission (s)
28
●
Clean around all belts, belt pulleys, etc.
-
●
Lubricate the belt tensioner (nipple)
59
●
Lubricate the three-point link
58
●
Lubricate the driver seat
58
●
Lubricate all cables
56
●
Lubricate links in the cutting unit
56
●
Clean the frame tunnel
-
❍
Lubricate the pedal mechanism
in the frame tunnel
in the frame tunnel
57
●
Lubricate the hydrostatic cable with linkage
60
●
Lubricate the parking brake cable
61+63
●
Lubricate the throttle
58
●
Lubricate the choke control
58
●
Lubricate the guide chain in the frame tunnel
57
●
Check the steering cables in the frame tunnel
25
●